Showing posts with label Painting. Show all posts
Showing posts with label Painting. Show all posts

Saturday, June 6, 2026

Painting Seasonality

I have been bemoaning my lethargy at the painting desk since the arrival of spring.  Painting production has fallen off from the respectable start in the first three months of the year.  Looking back at earlier analysis on my own painting seasonality and routine, I began to consider that this recent perception may not be anything out of my normal cyclical efforts at the workbench.

Let's see what the data suggest.

Grabbing the data from the Painting Log and loading them into my favorite data analysis software, I set to work.  Long time readers may recall that painting results have been diligently tracked since late 1995.

First place to start, here, is a tally of painted figures in the first five months of 2026.  The figure below shows actual counts of figures painted by month.  Reaching 100 painted figures in one month is always a stretch goal for me.  Rarely happens but noteworthy when it does.  Notice that the very respectable (to me) output in March was followed by a less than stellar count in April.  This pattern happens regularly.  I reckon I experience some painting fatigue after a big month and then back off time spent at the table in the next.  
Actual Painted Figure Counts in 2026
Raw figure counts can distort actual effort, though.  To compensate for the mix of figures and figure sizes painted, the counts are adjusted by figure size.  To make this adjustment, I use The Analog Hobbies Painting Challenge Painting Points conversion.  The graph below shows these raw counts converted to Painting Points.  Notice how January and February surpass March's totals when factoring in figure size.  January and February must have seen more 28mm figures cross the table than did March.  April totals still look anemic no matter the scheme used to count.   
Adjusted Painted Figure Counts in 2026
Back to my initial question regarding painting cycles, seasonality, and whether this year is an anomaly or fits into standard operating procedure.  The graph below shows monthly totals in Painting Points from 1996-2025.  That's thirty years of data!  The solid line super-imposed on the bar graph denotes the trend for monthly painting points.  Notice that production has fallen off from the more productive years of 2010-2020.  "TOTPOINTS" are painting figure counts adjusted for Painting Points.
Monthly production and trend in Painting Points.
For seasonality tests, I use times series decompositions to separate the various components of the Painting Log time series.  I stick to examining adjusted figure counts which are adjusted by Painting Points.  I skip over the intermediate steps to series decomposition but provide a graphic showing these seasonal decompositions in the graphic below: 
Seasonal decompositions by Painting Points
A bunch of squiggles for the various components.  Can a seasonal component be found herein?
Seasonal Painting Tendencies 1996-2025
Looking at the seasonal painting tendencies graph, above, my painting does exhibit some seasonal tendencies.  The decomposition suggests a clear yearly seasonal pattern in figure-painting output with the strongest positive seasonality in late fall and early winter and weaker output in spring and early summer.  In other words, my painting productivity appears to rise and fall in a repeating annual cycle rather than moving randomly.

This seasonality looks like a low-in-summer, high-in-winter painting pattern.  One plausible explanation is that I finish more figures in the colder months.  
Since I live in the northern hemisphere, indoor hobby time increases in colder months and competing outdoor activities decrease.  The late-year surge is strong enough that it is unlikely to be a small random fluctuation.

What does the graphic suggest for each month's output?
  • January.  Slightly above the average (Monthly Mean).  A decent start to the year, but not a major peak.
  • February.  Still a little above average.  Productivity holds up before the spring dip.
  • March.  Clear drop below average.  The beginning of the low-output season.
  • April.  Still below average, but not as weak as March.  A partial recovery, not a full rebound.
  • May.  Another dip below average. This is one of the quieter months in the cycle.
  • June.  Less negative than March, April, and May.  Productivity improves a bit, but it is still not strong.
  • July. Another weak month.  Summer still looks like a trough for figure painting.
  • August.  Back above average.  This is the first noticeable turn upward after the summer slump.
  • September.  Falls below average again.  The recovery is not smooth yet.
  • October. Strongly above average.  This looks like the beginning of the peak season.
  • November.  Very strong output.  The seasonal upswing continues.
  • December.  Highest point of the year.  This is the clearest peak in the cycle.
While my 2026 painting output follows a similar trend to the seasonality study, May 2026 was up as opposed to down from April.  May only outpaced April this year due to a very last-minute push to get some figures across the painting table before month's end.  So far, the seasonal pattern appears mostly intact for 2026.  Now, June may see a different turn, however, since painting time may be at a premium.

The seasonality offers a strong enough pattern that these data could be useful in planning hobby goals. How so?  If planning painting goals around this annual cycle, aim for the biggest output in late fall and winter.  Treat spring and summer as lower-intensity months for smaller projects or preparation.

Perhaps I am not such a slacker but a prisoner of my own tendencies?

Friday, June 22, 2018

I Have Found It!

A replacement for Dullcote, that is.  For several year now, I have been lamenting the inconsistency and "failure to flatten" of Testor's Dullcote.  See my earlier ramblings on this topic at Reliability of Primers and Dullcote.  Prior to the last four or five years, Dullcote was my dulling agent of choice.  It rarely failed to take the sheen off of my freshly painted figures.  But then something changed.  The packaging changed and my suspicion is that the formulation changed too.  That I could not prove.  Was the Dullcote having difficulty knocking the sheen off figures stained with MinWax?  I could not be sure.  All I knew was that results were inconsistent.  So I began a hunt for an alternative.  In every case, I returned to Dullcote and hoped for the best but the hunt never stopped.  
Several months ago I came upon Rust-Oleum's Clear Dead Flat in a Big Box hardware store.  "Dead Flat" certainly sounded promising and my expectations were set high.  Having applied this in various weather conditions, my verdict is that this product is NO WHERE near dead flat.  It leaves a satin sheen as do most matte clear topcoats.  Very disappointing.

Recently while browsing Dick Blick in search of a replacement Winsor & Newton Series 7 brush, I came upon W&N's Professional Matt Varnish.  After reading a few reviews, the product looked promising.  Given that this product is about a third the cost per ounce of Dullcote, I figured what do I have to lose?  Not much really.  My hobby closet holds many a half empty bottle of matt varnish that has failed to meet expectations.

Well, when the order arrived, I grabbed a stand of figures that still had the Dullcote satin sheen and gave them a spray with the W&N matt varnish.  The results were incredible!  Dead flat!  I have not seen this level of dead flattedness since the days of using Floquil's Figure Flat about twenty years ago.  Next I grabbed a unit of recently "dipped" figures.  Again, absolutely dead flat was the result.  Splendid!  I have found a new dull coat.

The only issue now is that I have become accustomed to figures showing a slight sheen...

Monday, August 31, 2015

Lectures To Paint By

Having a long, yet infrequent commute, I need something to help pass the time on those long, early morning/late afternoon five hour drives to and from Seattle.  Since discovering The Teaching Company's Great Courses lectures thanks to my gaming friend Scott, the commute has been much more interesting and time passes more quickly.

At present, I have churned through six courses, the latest being The Peloponnesian War by Dr. Kenneth Harl of Tulane University.  In 36 half-hour lectures and primarily relying on Thucydides, Harl takes the listener from the causes of the war through its conclusion including a summarization of lessons to be learned from the war.
Harl weaves an entertaining and fascinating story of the conflict with his own insights and personal interpretations intermixed with the traditional viewpoints.  Harl studied under Donald Kagan and frequently Kagan and his works are mentioned within the lectures.  As I listened, I thought it might be worthwhile to check Kagan's narrative against Harl's.

Kagan's The Peloponnesian War was purchased at a Friends of Multinomah Library (Portland, OR) book sale a few years ago for a few dollars.  Like a number of books in my library, it sits unread.  Off the shelf comes Kagan as my thoughts turn towards tackling this massive work.
\
These audio lectures are not only useful for long commutes.  I have found these lectures to be the perfect accompaniment to solitary painting sessions in the game room.  As a side benefit, listening to these historical works provides painting motivation and contemplations on existing or possible new projects.  So far, no Peloponnesian project has made it onto my project list yet.

Thursday, February 19, 2015

Taking a Dip

With the exception of the Sash & Saber Swiss recently completed, the remaining Sash & Saber French never made it through the now standard Minwax stain treatment.  One battalion of Elite French and one battalion of Front Rank French legere also made it into the dip in this round as well as all French skirmishers. 
French and Swiss After Minwax
The stain provides a much greater depth to the figure and nicely outlines the webbing, clothing folds, facial features, etc..  Some may not like the look but I have grown quite fond of the method and results.  While results are better with uniforms in a more earth tone palette, for me, it works for most uniforms.

From the side-by-side comparison photo of the Swiss below, the contrast between the unstained (left) and stained (right) is apparent.
Swiss Before
There!  The Sash & Saber French contingents are now consistent with their brethren from other manufacturers.  I await a resupply of Tajima tufts to finish the bases.

Tuesday, January 6, 2015

Lumpy Acrylic Paints - No More!

After switching to acrylic craft paints many years ago from using Polly S and Poly Scale acrylics, one recurring problem is that, over time, the paint tends towards lumpiness.  Even with vigorous shaking, the craft paints I use (Delta Ceramcoat primarily) can still maintain coarse pigment grains and outright lumpiness.  Sometimes, the paint is very gooey and thick straight from the bottle.  The problem could be magnified in old bottles of paint but even a new bottle can contain lumps and grainy pigments.

On a recent browse on Amazon.com, I came across a paint mixer from Badger that looked quite interesting.  At not much more than $10, I figured, why not give it a try?

As in all Amazon.com purchases, I had the little device in my hands in no time at all.
Quick to give it a test, I grabbed a lumpy bottle of white paint and set to work.  From the photo below, I stopped the motor and pulled the rotor out of the bottle.  See all of the gunk that has accumulated on the rotor and stem?  Yuck. 
After cleaning the stem and rotor of the gunk, the mixer was placed back into the bottle for a second round of mixing.  This time, very little residue was left on the mixer and the paint in the bottle looked smooth.

A couple of cautions:  only turn the mixer on after it has been submerged into the paint and always turn it off before pulling it from the paint jar.

Before using this mixer, I thought vigorous bottle shaking was sufficient to break up the lumpy pigments and provide a smooth paint mixture.  After using the Badger mixer, that thinking was wrong.  How did I manage without this device?

Saturday, November 29, 2014

Kolinsky Sable Brush Resupply!

After discovering that the Winsor & Newton Series 7 Kolinsky Sables were back in stock (see Kolinsky Relief), an order was fired off to Dick Blick to grab a few before someone changed their mind.  Ordered were a half dozen brushes with a mix of W&N Series 7 of sizes 00 and 0.  As long as my other W&N 7s have lasted, these brushes may represent a lifetime supply.
W&N offers two styles of the Series 7: Pointed Round and Miniature.  From the website photos, the Miniature style appeared to have a shorter and less full bristle.  Having never tried the Miniature before, I wondered if it might offer a figure painting brush for fine work?

When the package arrived, I laid out the two styles for comparison.  The Round Pointed is the top brush with the Miniature below.  As seen from the photo, the fibers on the miniature are shorter and less robust.  The Miniature might, indeed, make for a good detailing brush.  I will see soon!
On the painting desk are a myriad of figures.  In work are several Impetvs stands for the Reconquista project, 10mm Confederate infantry (boy!  it has been a very long time since this project has seen action on either the gaming table or the painting desk), First Afghan War British infantry, and ancient Celts.  Much activity with results trickling out soon.  Still awaiting a chance to give the Chadd's Ford battle a run-through. 

Saturday, November 15, 2014

Kolinsky Sable Brush Relief

Brushes.  They are like old friends, are they not?
My companions
My favorite brushes are the Winsor & Newton Series 7 and Raphael Series 8404 Kolinsky sables.  My old friends in the photo have been in constant use for at least five years.  While the Raphael is beginning to lose its point and snap, the WN7 is still going strong and never fails to return to a fine point.

Those using Kolinsky sable brushes for painting probably have experienced frustration finding their favorite Kolinsky sable brushes over the last year or more.  I know I have.  Since last year, my favorite Kolinsky sable brushes, Winsor & Newton and Raphael, have been unavailable.  From my understanding of the situation, U.S. Fish and Wildlife Department was the culprit.  Kolinsky sable was placed on their "Do Not Import" list.
Fortunately, it looks like we have turned the corner on the whole affair.  A quick look through the latest Dick Blick flyer led to a browse on their website (Dick Blick Winsor & Newton).  Could it be?  The brushes are back in stock!
Even though I maintained a reserve of a couple of WN7 and Raphael8404 brushes, perhaps a small order is prudent just in case the Government changes its position?

Also included in the flyer were links (Brushes 101) to three pdfs containing a primer on brushes and brush selection.

Saturday, October 25, 2014

State of the Painting Desk

State of the Painting Desk is really just a random snapshot of the works in progress on the workbench.  Last month's snapshot featured Napoleonics with Elite infantry and Front Rank cavalry in work.  The October snapshot illustrates that the Napoleonic theme continues although other units have passed across the table in the interim.  More 28mm Napoleonics are seeing action at the paint station in today's photo.  Elite Miniatures and Front Rank are again featured with 14 Elite British rifles in the background and 16 Front Rank French legere in the middle.  In the fore are Battle Honors' ACW figures that will stand in for Garibaldi for the 1859 project.
A number of other figures have been prepped, stuck to golf tees, and awaiting their turn at the brush.  What else is coming up?  More French mortars for the Narvik project; heavy this time.  The 28mm Punic Wars project has a unit of African spear in queue and the SAW project soon will have American dismounted cavalry undergoing the brush.  Oh, I have a handful of old Minifig Native Americans to paint for the 15mm AWI project.

The 15mm AWI project has been dormant for a long time.  At one point, I figured the project was complete.  My problem is that a dose of AWI gaming has energized me to add a few more units to the project even if not needed for gaming.  While all of the Jeff Valent and Frontier figures are long gone, a few packets of Minifigs and Freikorps remain to be painted.  I am afraid LotF may see a return to painting German and British units in 28mm too.  Does it never end?  Woe is me...

Tuesday, July 1, 2014

Painting Analytics - First Half 2014

With the first half of 2014 receding in the rear-view mirror, time to take stock of my painting output.  My sense going into this exercise was that production was down in the first six months compared to recent years.  For me, dialing back on painting throughput a bit was positive in that I had time for more activities.  Well, some of the decrease in painting time was involuntary so I cannot really take much credit for having the foresight to scale back.  Having fewer painted figures mustering off the painting desk has allowed more time to blog, read others' blogs, and in general, ponder gaming ideas.

No new painting project blitzes surfaced in the the first half of the year so that accounts for some of the reduction too.  With no deadlines, the paint brush lay idle.  I can't use increased group gaming as an excuse either although solo play has increased.  One group game per month is about all I can schedule.

Enough excuses!  Let's see what I did manage to get off the painting desk thus far.

In terms of raw numbers, it looks like about 500 figures crossed the painting table with about 43% of those being 15mm.  Yes, I know that aggregating by full year prior to 2014 distorts the picture somewhat but we can extrapolate and imagine full year output, can't we?  If I can manage to duplicate first half output by finishing with 1,000 painted figures for 2014, I would be pleased.


When examined by era, 15mm Italian War of Independence (1859 Project) saw the most action having about 20% of the output.


 As seen in the pie chart below, a large variety of different periods hit the painting desk.  Tough to get bored or burned out when there is such variety.
Of course, raw totals weight all figure sizes equally and we know that a 28mm Roman takes longer to paint than a 6mm Roman, right?  To account for this variation, Adjusted Counts have been computed.  For Adjustments, I use the Analog Hobbies Painting Challenge points system.

After that adjustment, 28mm takes the lead by figure size (scale) at over 43% while 15mm falls back to 28% of total output.
   

Considering a perspective by era, the Reconquista project takes top honors at about 21% followed by the Italian War of Independence project at nearly 13% of totals.



So, what would I like to see cross the painting desk in the second half of the year?  I have such varied interests and collections that almost anything is possible to surface upon the paint table at any time.  Maybe I will try to maintain the variety seen in the first half by employing a shotgun approach to painting targets?  That is, every project will be in my sights for possible work.

I have a few 28mm Napoleonic foot and horse units that could use a smack with the brush.  Painting three foot battalions and six horse squadrons would just about exhaust my stock pile of lead.  In 28mm, I still have a large supply of Reconquista and Punic Wars lead.  Perhaps, knocking a few Impetvs sized units will be in order.  I bet SAW Americans cross the desk to give my Spanish some opposition too.

On the 15/18mm front, I enjoy working on the 1859 project and I have not hit the critical mass required to field a game for the Napoleonic 1799 project.  Both could see work in the second half.

Of course, plans rarely survive contact and in the end, I paint what moves me.  Don't we all?  

Sunday, June 29, 2014

State of the Painting Desk

With momentum up having finished the two Reconquista heavy cavalry stands, I hoped to finish one more unit before the first half of 2014 drew to a close.  While weekend home projects, gaming, guests, and cycling kept me away from the painting desk for longer than anticipated, work did progress on a few units.  Unfortunately, none of these will make it into the "Completed" column before 01 July.  Oh well, I will have a jump on next month's painting tallies.

On the workbench today are works for four different projects.  What projects do I have in work?  The four units in work comprise: 18mm SYW Prussian musketeer, 28mm US infantry for Spanish-American War, 28mm French Chasseurs a Cheval, and 28mm Arabs.

In the foreground is one BTD Trojan chariot that arrived with this week's BTD order.  The chariot assembly is somewhat fiddly to assemble and I scratched my head wondering how to attach the trace to the cart but I believe I have it.  Initial inspection suggests that the BTD chariot dwarfs the Old Glory chariots completed earlier.  I will confirm how these disparate chariots look side-by-side once the BTD piece is finished.
Painting Desk 29JUN2014
A closer glance at the center tray shows eight Front Rank horses (in the background) that will be used in carrying an equal number of French Front Rank Chasseurs a Cheval.  In the foreground are 15 Old Glory SAW U.S. infantry.  While I have painted many Old Glory Spanish from this range, these are my first Americans for the conflict.  The Old Glory Americans exhibit excellent sculpting with much character.  These could be my favorite Old Glory 28mm figures and I have seen and painted many of the ranges!
SAW US infantry and horses for French cavalry

Next up are 23 Blue Moon AWI Hessians to be fielded as SYW Prussian musketeers.  With the lemon yellow cuffs, waistcoat, and breeches, these lads will muster out as the first battalion of the 10th Musketeer Regiment. 
Blue Moon SYW Prussian Musketeers
Finally, twelve 28mm Artizan Black Guard Moors from the El Cid range are seeing action on the work bench.  In this photo, I made a bit of progress from the overall desk shot above.

Artizan Black Guard
With the first half of 2014 ending and painting totals in the book, it is time to look back and see what I managed to paint thus far in 2014.  With no new "major" project to drive painting and increased travel, totals will be down over last year.  The answer to how much output has dropped will be left until after I crunch the numbers.  Expect a battery of analytics in the future and then you be the judge. 

Wednesday, February 5, 2014

State of the Painting Desk - Lighting Upgrade

I increasingly require more light by which to paint.  A number of lighting solutions have been explored and all seem to fall a bit short.  All, that is, except for the lamp I currently use.  While the current swing arm light works satisfactorily, I am always searching for a source to provide additional light and illuminate my work space even more.

Given my near constant search for better lighting, I was intrigued to see Monty's review of the Daylight Triple Bright lamp.

      Monty's Triple Bright Lamp Review

What could be better than a "Triple Bright" lamp?  Although a little on the expensive end of lamps, I ordered the piece and waited.  Well, the lamp arrived in Tuesday's post and quickly was installed at the painting desk.  This lamp is huge!  That means that much more of the painting desk can be illuminated by it.
Painting under the new lamp
When I flicked it on, I was surprised that the entire game room was not flooded in a bright light.  This lamp produces a softer, less harsh light than does the current swing arm but the painting area under the light was illuminated and free of shadows.  I painted for about 30 minutes using the Triple Bright and the softer light may take time to allow my eyes to adjust to painting under the less intense light.  I will have a better feel for its usefulness after spending a few good sessions working under its glow. 
Thanks Monty for the recommendation!

Friday, May 10, 2013

Reliability of Primers and Dull Cote

Over the decades of figure painting, I have tried a number of spray products for the first and last steps in the painting process. At some point in time, the product is discontinued, formula is changed, or I am otherwise unhappy with the results. Sometimes this change is infrequent while at other times it seems like I'm bogged down into a cycle of product swaps and experimentation. I may be emerging from one of those annoying cycles now.
For the undercoat, I typically use a flat black primer (when I can find it) or flat black enamel.  Over the last two years, a number of spray enamels have been used.  The ones I recall are shown below.  




I have had problems with nozzles clogging with some brands, terrible smell with others, coarse spray with some, and a tendency to get cans that spray a gloss rather than flat black.  In particular, the Rustoleum Ultra cover 2x went on too thick and too glossy.  Sometimes, the product works for awhile and then I get a satin or gloss finish rather than flat.  I often rationalize the gloss coat as related to variations in either humidity or temperature.

During the winter, I typically spray in the garage and then bring the figures inside to dry in a well-ventilated storage room.  Often that works to cut down the gloss finish; other times not so much. 

On a trip to Home Depot this winter, I spotted the Quick Color brand.  It was only $0.97 a can vs $3.50 - $4.00 a can for the products above.  I brought it home and the result was a dead flat finish.  Cheap and effective.  Hope that result continues.  The Greek hoplites are sprayed with Quick Color and the result is a flat black finish.
For the final topcoat, I spray a flat, clear sealer.  I have tried Krylon products but have never had satisfactory results.  I know painters who are satisfied with Krylon but for me, it never produces a dead flat finish.  


The product most used is Dull cote whether it is from Testor's or Model Master.  At one time, I could only get the Testor's brand but now both are equally available.  Both products appear to be the same formulation.  Again, temperature and humidity seem to affect the results so a quick spray in the garage and then into the storage room reduces the tendency for glossy results.  



The problem with Testor's dull cote is the recent change to the can and formulation.  No longer can I find the black and yellow can.  The white and blue canned product still produces a flat finish but reliability issues have been frequent.  Reliability issues?  Yes.  Every third can seems to ooze the dull cote liquid from the base of the nozzle while spraying.  This liquid pools up in the lip and then liquid dull cote runs down the can and either onto the garage floor, my hand, or onto the painted figures.  The can still produces a spray but I usually put the can aside once it begins oozing from the base.


What are your favorite flat black and flat clear products that are readily available?